Packaging question

How do I pack glass or ceramics for posting?

Short answer

Wrap each piece separately in small bubble wrap, pack it in the centre of a box with about 5 cm of fill all round, seal with an H of tape, and double box anything valuable.

  1. Prepare it. Remove lids and loose parts and wrap them separately. Tape down anything that moves.
  2. Wrap it. Two or three layers of small bubble wrap, bubbles facing in. Never wrap two pieces together.
  3. Pad the base with about 5 cm of paper void fill or large bubble wrap.
  4. Centre it so no side touches the box wall, then fill every gap.
  5. Seal the top and bottom with an H of tape (centre seam plus both edges).
  6. Label it. Fragile tape helps handlers, but it is no substitute for padding.

For a bottle, fill both ends so it can’t slide. A 12 x 9 x 6 (305 mm long inside) takes a typical 500 ml bottle laid flat with some fill at each end; measure the bottle first, and use an 18 x 12 x 7 (457 mm long) for a tall bottle or more fill. For framed pictures, tape a cross on the glass and protect the corners before wrapping.

Answered by The Bulk Box Company. Last updated October 19, 2026.

Products mentioned